Knowledgebase
Portal Home > Knowledgebase > Setup > Windows > Windows 8 > How to Setup BulletVPN PPTP Manually on Windows 8
How to Setup BulletVPN PPTP Manually on Windows 8
1. Press "
+ R" buttons on your keyboard to start the run command, type "rasphone" and Press "Ok".
2. Click "Ok" to add new VPN connection, jump to next step if you already have vpn profiles.
3. Press "New" if you have any other VPN Connection.
4. Press "Workplace network" to add a vpn connection.
5. You can choose one of our server from the list here. Press "Create" button.
6. Click "Properties".
7. Press "Security tab", choose "Point to Point Tunneling Protocol (PPTP)" under Type of VPN .
8. Enable secure authentication. Click Allow these protocols and make sure MS CHAP v.2 enabled.
9. Press "Networking Tab" uncheck all except Internet Protocol Version 4 (TCP/IPv4). Press "Ok".
10. We are ready to connect "BulletVPN" now, click "Connect" button.
11. Enter username and password you get once you subscribed through our website. Please set to remember the password. Domain field should be left blank.
12. You can see "BulletVPN" connected under Networks.
13. Use "Disconnect" button to disconnect VPN
14. Next time just Connect button under Networks, your username and password are saved so there is no need enter them again.
